1011 East Park Industrial Drive
St. Louis, Missouri 63130

www.universalewing.com
Home

 

Online Catalog Section Listing Cutting Room Equipment Heat Cutters
Previous Sub-Section:
Blades and Parts for Hand Held Shears
Next Sub-Section:
Bosch-Lesto Foam Rubber Cutter
Cutting Room Equipment: Heat Cutters

Engel Heat Cutter for Intermittent Use

This ENGEL heat cutter is designed for intermittent operation, and should not be used for more than twenty minutes at a time without pausing. The blade takes 6-8 seconds to heat up. Heat can be approximately controlled by using the on/off action of the trigger switch. The HSG 0 is best suited for cutting awnings, filter cloths, sail material, as well as synthetic strings and ropes. Figure (A) shows the unraveling which occurs when certain fabrics are cut mechanically. Figure (B) shows the result when the same fabric is cut and sealed with an ENGEL Heat Cutter. The HSG 0 (Blade not included) can be equipped with blades as well as the SF cutting foot. 90 Watt capacity, 110 Volt.

Type 100R Cutting blade of higher capacity for separating stronger fabrics, and strings and ropes up to 15mm diameter.

The SF cutting foot has been designed especially for the HSG 0. When used with cutting tip 100R synthetic material can be cut and the cut selvage can be sealed in one operation. This combination is especially effective when cutting large sized cloth and awnings like sails, canvas blinds and filter cloths.

Click Image for full view.
No. 14467 Shown
Click Image for full view.
Click any Image for full view.

Click Picture
to Enlarge
USS Part # Style #DescriptionIs this a Universal Stock Product?Unit / Quantity Pricing and Ordering
   
No. 14467
14467 HSG0
E/100
H/100
ENGEL HEAT CUTTER 110V

Item: Heat cutter.
This is a Brand Name Item Engel Brand

 More Info  Click here for Full Item Information
 Add to My Items 
EA
  $239.00
 
 
Qty: 
No. 14468
14468 100R
E/500
H/205
HEAT CUTTER BLADE

Item: Heat cutting blade.
This is a Brand Name Item Engel Brand

 More Info  Click here for Full Item Information
 Add to My Items 
 EA
  $49.00
 
 
Qty: 
No. 14473
14473 SF
E/400
H/600
CUTTING FOOT
Limited Quantity Available   

Item: Cutting foot.
This is a Brand Name Item Engel Brand

 More Info  Click here for Full Item Information
 Add to My Items 
EA
  $142.00
 
 
Qty: 
Top of Page


Engel Heat Cutter for Continuous Use

This ENGEL Heat Cutter, designed for continuous use, efficiently cuts and seals heat sensitive materials such as synthetic woven and knitted fabrics. Other applications include cutting and welding ropes, cords, and cables made of synthetic fibers. Features a fixed 55 x 4mm blade. The materials to be cut, typically ropes or belts, are pressed against the hot blade. 40 Watt capacity. 110 Volt.

Click Image for full view.
No. 14475 Shown
Click Image for full view.

Click Picture
to Enlarge
USS Part # Style #DescriptionIs this a Universal Stock Product?Unit / Quantity Pricing and Ordering
   
No. 14475
14475 HSG00
E/105
H/140
ENGEL HEAT CUTTER 110V

Item: Engel heat cutter.
This is a Brand Name Item Engel Brand

 More Info  Click here for Full Item Information
 Add to My Items 
EA
  $525.00
 
 
Qty: 
No. 14476
14476 55M
H/400
HEAT CUTTER BLADE

Item: Heat cutter blade. For: No. 14475 Engel heat cutter.
This is a Brand Name Item Engel Brand

 More Info  Click here for Full Item Information
 Add to My Items 
EA
  $17.10
 
 
Qty: 
Previous Sub-Section:
Blades and Parts for Hand Held Shears
Next Sub-Section:
Bosch-Lesto Foam Rubber Cutter
   
   
HomeHome | Contact Us | Frequent Questions | Site Map | Register | Log InTop Of PageHome
Phone: 1-314-862-0800