Electro-Rail Low-Level Track Hanger

Used in place of track hanger FRS-105 where head room is limited. Takes 3/8" diameter bolts. Can be attached to straight track at any point between track joints. Not suitable for curved track.

Note: Minimum of two track hangers required for each straight track section. Not suitable for curved track.

Specifications

For:

FRS100 & FRS200 Plug-In & Trolley Series, FRS300 Plug-in Series, Electro-Rail E300, Electro-Rail E60

Note:

Minimum of two track hangers required for each straight track section. Not suitable for curved track.