Shimpo DT-207LR Digital Handheld Tachometer

Item Number:
14011
Primary Style No:
DT207LR
Style No:
DT207L, DT207LR
Brand:
Shimpo
Price:
$450.00/EA
Qty Available: 1 Qty Available: 1

Description

The Shimpo laser model DT-207L features an expanded memory (ten independent readings plus last, max. and min.) and also an expanded measuring of rotational speeds 6 to 99,999 RPMs. Battery life has been improved and is now seven times greater than previous models and four times greater than the DT-207B, while the required number of batteries has been reduced to two. The included contact adapter enables the measurement of five additional rate functions (RPM, YPM, mPM, FPM and IPM) as well as four length functions (yards, meters, feet and inches). This new sophisticated instrument features the same high quality components and rugged aluminum housing you have always come to expect. Low power consumption, battery operated, hand held and computer-circuitry-controlled. For contact measurement use with the adapter and cone rubber tip.

 

At a Glance...

  • Expanded memory: Ten independent readings plus last, max, and min.
  • Expanded measuring of rotational speeds: 6 to 99,999 RPMs.
  • Improved battery life: Seven times greater than previous models and four times greater than the DT-207B.
  • Reduced battery requirement: Now only requires two batteries.
  • Included contact adapter: Enables measurement of five additional rate functions (RPM, YPM, mPM, FPM, and IPM) and four length functions (yards, meters, feet, and inches).
  • High-quality components and rugged aluminum housing.
  • Low power consumption.
  • Battery operated.
  • Handheld.
  • Computer-circuitry-controlled.
  • For contact measurement, use with the adapter and cone rubber tip.

Specifications

Accuracy:
±.006% of reading ±1 digit (or ±6 rpms max.): 25,000 to 99,999 rpms, ±2 rpms: 8,300 to 25,000 rpms, ±1 rpm: 6 to 8,300 rpms
Construction:
Die-cast aluminum housing
Dimensions:
6.6 inch L x 2.4 inch W x 1.8 inch H (167mm x 61mm x 45.7mm)
Display:
5 digit 0.4 inch (10mm) high LED
Low Voltage Indicator:
Flashing LO BAT display
Measuring Distance:
14 foot (4.2m) maximum
Measuring Units:
RPM (on contact using adapter, included) YPM, mPM, FPM IPM and Length: YRD, m, FT and IN using 6 inch wheel w/200L adapter
Memory System:
13 readings are stored in memory and retained for 5 minutes (last, max., min, and 10 extra measurements)
Over Range Indicator:
Flashing numerals
System Control:
Single chip C-MOS microprocessor
Update Time:
1 second (typical)
Warranty:
1 year
Weight:
0.8 lbs. (365g)
Operating Temperature:
32° to 113°F (0° to 45°C)