Labor Saving Devices
4-Way Normally Closed Clippard Valve, 1/8 Inch NPT
Item Number: 18541
The MJV/MJVO series are high flow 1/8" NPT ported 2-Way, 3-Way and 4-Way valves that change their flow path when the stem is either depressed or released (spring return). The 2-Way and 3-Way valves are offered in both Normally-Closed and Normally-Open versions.
Bimba Air Cylinder 1-1/16" x 1" (Bimba 091-P)
Item Number: 10012
Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.
Bimba Piston Rod Clevis Assembly, 1-1/16" Bore, 5/16-24 Rod Thread, 1/4" Clip Diameter
Item Number: 16555
Includes clevis, nut, pin and 2 spring clips.
Bimba Piston Rod Clevis Assembly, 1-1/2" Bore, 7/16-20 Rod Thread, 3/8" Clip Diameter
Item Number: 16557
Includes clevis, nut, pin and 2 spring clips.
Brass Air Hose Barb, 1/4" OD Tube, 1/8" NPT
Item Number: 18406
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Air Hose Barb, 90° Elbow, 1/4" OD Tube, 1/8" NPT
Item Number: 18410
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Air Hose Barbs, 1/4" OD Tube, 1/4" NPT
Item Number: 18407
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Clippard Air Pilot Actuator, #10-32
Item Number: 11069
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Clippard Air Pilot Actuator, 1/8 Inch NPT
Item Number: 11070
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Filter, Regulator & Lubricator Kit, 1/8 Inch
Item Number: 16308
1/8" & 1/4" Filter/Regulator combination complete with automatic drain. For use with air cylinders. 1/8" comes with 3 feet of 1/4" O.D. poly hose, 1/4" tube X 1/8" male pipe fitting for line connection. 1/4" comes with 5 feet of 3/8" O.D. poly hose, 3/8" tube X 1/4" male pipe fitting for line connection and coupling for quick disconnect. Mounting bracket with screws also included.
Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF
Item Number: 16247
Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF
Tubing, Red, .170" ID x .250" OD x 100' Length
Item Number: 12571
Polyethylene (Poly) tubing is flexible and oil resistant. Most commonly used for air and fluid applications where pressures do not exceed 133 p.s.i. For assembly with barb, poly plastic or tube-ins. Sold in 100 feet rolls.
Universal Adjustable L-Fitting with Nitrile O-Rings
Item Number: 16779
Stud is stainless steel hex head with screwdriver slot. Complete with O-ring and gasket. Permits port to be set in any direction 360°. Secure by tightening screw stud.
