Plain Track

Sections complete with Bus Bars. Available in 225, 375 and 500 amp. 10 feet is standard length. Shorter lengths furnished on special order.

Click HERE to view all plain track sections.

Door Track

Door track sections are identical to plain track except for the addition of two hinged doors in the bottom for the insertion and removal of trolleys. When closed, the doors are securely locked and accurately aligned witht he rest of the track to form an ininterrupted runway for the trolleys. Hinged doors are easy to open or close. No tools are required. Pressing pins together against spring pressure releases locking bolts. Door openings are polarized so trolleys cannot be inserted in improper polarity.

Click HERE to view all door track sections.

Expansion Track

Expansion Track sections are for use where it is necessary to compensate for the difference in total expansion or contraction between steel track housings and copper bus bars. They must be used on installations across building or structural expansion joint.

At least one Expansion Track section should be installed in each 400 ft. of track run. Additional Expansion Track sections may be required if the installation is subjected to a wide range of temperature changes.

The standard 10' Building Expnasion track section is designed to provide 2" of expansion and 2" of contraction of the steel housing above and below the normal 10' length at 72°F). If the temperature at the time of installation is other than 75°, due comensation must be made according to the chart below. The bus bars and track housing in this section telescope to provide a continuous surface for trolley contacts and the ball bearing support wheels of the trolley. Enclosed flexible jumpers connect the bus bars and maintain full current carrying capacity across the joints.

Click HERE to view all expansion track sections.

Length Settings for Standard 10' Expansion Track

Continuous Rating: 175 Amperes or 225 Amperes - 600 volts A.C., 250 volts D.C.
Intermittent rating: (1 minute off, 1 minute on) 250 Amperes or 300 Amperes - 600 volts A.C., 250 volts D.C.

Sections complete with Bus Bars.

10 feet is standard length. Shorter lengths furnished on special order.