Product Filter
Amps
Poles
Brand
Fits

 

 

Need Assistance?

We are happy to help!
Call: 1.800.325.3390

 

Join our mailing list:

Track Accessories & Hangers

Narrow Your Search
Electro-Rail Clevis Support for Tie Rod Installations

Item Number: 12283

Clevis support for tie rod applications. Malleable iron, with 3/8" cross bolt and 3/8"-16 tapped hole for tie rod. Must be used in conjunction with FRS-124 and FRS-105 track hangers.

$13.00/EA
$9.10/EA
30% discount
Qty Available: 3800
Electro-Rail Coupling Set – 4 Pole, 50 Amp

Item Number: 11676

4 pole, 50 amp coupling set for FRS300 Plug-In Series. Consists of side plates, cover and bus bar connectors used to join track sections. One coupling is required for every two sections of track joined.

$92.00/SE
$64.40/SE
30% discount
Qty Available: 901
Electro-Rail Dead End Cap – 4 Pole

Item Number: 11679

4 pole end cap for FRS300 Plug-In Series. Used for closing the end of a track run.

$43.00/EA
$30.10/EA
30% discount
Qty Available: 201
Electro-Rail Duplex Busway Hanger Set

Item Number: 11675

Duplex busway hanger set. For FRS100 & FRS200 Series, also FRS300 Plug-In Series. For 10' support spacing to be used at track joint over coupling.

$81.00/EA
$56.70/EA
30% discount
Qty Available: 69
Electro-Rail End Feed Set – 4 Pole, 50 Amp

Item Number: 11678

50 amp, 4 pole end feed. Used for connection to power supply at the end of track run. Serves as end cover. Concentric knockouts at end (1/2 or 3/4 conduit). Terminals included accomodate No. 14 to No. 6 strand wire. Fits FRS300 Plug-In Series.

$163.00/EA
$114.10/EA
30% discount
Qty Available: 215
Electro-Rail Low-Level Track Hanger

Item Number: 12363

Hanger (low level). For FRS100 & FRS200 Series, also FRS300 Plug-In Series. Used in place of track hanger FRS-105 where head room is limited. Takes 3/8" diameter bolts. Can be attached to straight track at any point between track joints. Not suitable for curved track. Minimum of two track hangers required for each straight track section.

$16.00/EA
$11.20/EA
30% discount
Qty Available: 459
Electro-Rail Straight Track Hanger

Item Number: 12284

Track hanger for FRS100 & FRS200 Series, also FRS300 Plug-In Series. For mounting straight track sections. Mounting hole will take 3/8" diameter bolt. They can be attached to straight track at any point between track joints. Not suitable for curved track sections. Minimum of two track hangers required for each straight track section.

$9.00/EA
$6.30/EA
30% discount
Qty Available: 1561
Electro-Rail Tie Rod Hanger

Item Number: 12291

Track hanger for tie rod. Fits FRS100 & FRS200 Series, also FRS300 Plug-In Series. Allows direct attachment of 3/8" tie rods at any point between track joints. Permits easy leveling of track sections. When used with curved track, field notching of track top flange is required for clearance of clamping bolt. A minimum of two track hangers required for each straight track section.

$11.00/EA
$7.70/EA
30% discount
Qty Available: 5484