Labor Saving Devices
At Universal Sewing Supply, we understand that efficiency is the cornerstone of success in the commercial textile industry. Our labor-saving devices are not just tools—they are essential components that transform how businesses operate. By streamlining operations, our labor saving products can significantly reduce manual effort, enhance precision, and speed up production times. This means fewer errors, lower labor costs, and a quicker turnaround for orders, all of which translate into increased profitability and competitive edge. Investing in our products not only elevates your production capabilities but also ensures that you remain at the forefront of industry innovation, meeting market demands with unmatched agility and excellence. If you are unable to find what you are looking for, please contact our sales department.
Universal Heavy-Duty Pneumatic Tape Cutter, 4 Inch
Item Number: 11707
The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.
Universal Heavy-Duty Pneumatic Tape Cutter, 3 Inch
Item Number: 11955
The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.
Upper Tape Feeder with 70mm Roller
Item Number: 4618
High quality electronic metering device provides accurate feeding of elastic for perfect fit. 70mm (2-3/4") roller width accommodates most elastics. Complete with mounting base. 110 Volt.
Universal Heavy-Duty Pneumatic Tape Cutter, 2-1/2 Inch
Item Number: 11689
The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.
Clippard Air Cylinder,1-1/2" Bore S/S Cylinder, Clevis Mount, Rotating Rod (Clippard CDR-24-1)
Item Number: 10289
Clippard Air Cylinder,1-1/2" Bore S/S Cylinder, Clevis Mount, Rotating Rod (Clippard CDR-24-1)
Universal 12" Tape & Binding Reel, Ball Bearing with Brake
Item Number: 13929
Ball bearing delivers binding freely and brake prevents spinning. Reel may be positioned overhead, under table, or in any other position on table. Reel can be tilted to any angle. Made in U.S.A.
Standard Cloth Puller with 2 Rollers
Item Number: 50075
Equipped with 3” stainless steel rollers (1 knurled and 1 smooth). Black painted aluminum mechanism cover eliminates thread wrapping around gears and pulley. Black painted base made of heavy duty cast iron. Standard model used on machines such as Singer 112, 212, 281; Union Special, etc.
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 4"
Item Number: 10463
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 4"
Top Knife for Universal & Clinton Heavy-Duty Cutters, 4"
Item Number: 10436
Top Knife for Universal & Clinton Heavy-Duty Cutters, 4"
Top Knife for Universal & Clinton Heavy-Duty Cutters, 3"
Item Number: 10445
Top Knife for Universal & Clinton Heavy-Duty Cutters, 3"
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 3"
Item Number: 10393
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 3"
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"
Item Number: 10454
BOTTOM KNIFE 2-1/2"
Base Plate for Universal & Clinton Heavy Duty Cutters
Item Number: 18783
Base Plate for Universal & Clinton Heavy Duty Cutters
Top Blade Holder for Universal & Clinton Heavy-Duty Cutters
Item Number: 10509
Top Blade Holder for Universal & Clinton Heavy-Duty Cutters
Collar Turner, Complete
Item Number: 6944
For pointing and turning of collars, cuffs, straps, etc. Top needle tip (spring loaded) prevents damaging the lightest of materials.
Universal 10" Binding Wheel, Ball Bearing with Brake
Item Number: 13916
Reel tilts to any angle and can be used in any position (vertically or horizontally). Ball bearings help eliminate drag. Special brake eliminates binding overrun when machine stops. Complete with mounting clamp.
Top Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"
Item Number: 10422
Top Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"
Belt & Tie Turner with 4 Tubes
Item Number: 5808
Belt and Tie Turner for all types of turning operations on garments of all kinds, as well as a pocketbook or other like articles. Simple to operate. Just insert appropriate tube size, slip the item on the tube, move handle down and release rod. Rod goes back to starting position and is ready for the next item. Installation just requires attaching to table or other convenient location with screws or bolts. Comes complete with 7 tubes with steel collars; sizes 3/8" (1), 1/2" (2), 5/8" (2) and 3/4" (2).
Filter, Regulator & Lubricator Kit, 1/8 Inch
Item Number: 16308
1/8" & 1/4" Filter/Regulator combination complete with automatic drain. For use with air cylinders. 1/8" comes with 3 feet of 1/4" O.D. poly hose, 1/4" tube X 1/8" male pipe fitting for line connection. 1/4" comes with 5 feet of 3/8" O.D. poly hose, 3/8" tube X 1/4" male pipe fitting for line connection and coupling for quick disconnect. Mounting bracket with screws also included.
Snap Action Air Pilot Operator with Reset, #10-32
Item Number: 10897
For Humphrey TAC, TAC2, and TAC3 Valves. Threads onto any TAC push button valve and Micro Switch (No. 2669). Air pressure applied to pilot port drives 'V' cup sealed piston to actuate valve or switch push button. Maximum pilot pressure 125 p.s.i.
Universal 8" Tape, Ribbon & Binding Reel, Ball Bearing with Brake
Item Number: 96396
The Universal 8" Tape & Ribbon Binding Reel offers versatility with its tilting design for any angle or position, smooth ball bearings to reduce drag, and a special brake to prevent binding over-run. Comes with a mounting clamp for easy setup.
Cone Bearing, Stubby, 1-1/2" OD, 3/8" Bore
Item Number: 58208
Cone Bearing, Stubby, 1-1/2" OD, 3/8" Bore
Complete Deluxe Friction Disc for 3/8" Bore, 12" Diameter
Item Number: 13935
Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.
Complete Deluxe Friction Disc for 3/8" Bore, 8" Diameter
Item Number: 13327
Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.
Complete Deluxe Friction Disc for 3/8" Bore, 10" Diameter
Item Number: 13932
Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.
Shaft Assembly for Universal & Clinton Heavy-Duty Cutters
Item Number: 10271
Shaft Assembly for Universal & Clinton Heavy-Duty Cutters
Tubing, Red, .170" ID x .250" OD x 100' Length
Item Number: 12571
Polyethylene (Poly) tubing is flexible and oil resistant. Most commonly used for air and fluid applications where pressures do not exceed 133 p.s.i. For assembly with barb, poly plastic or tube-ins. Sold in 100 feet rolls.
Adjustable Knife Guard for Universal & Clinton Heavy Duty Cutters, Complete
Item Number: 10523
Adjustable Knife Guard for Universal & Clinton Heavy Duty Cutters, Complete
4-Way Normally Closed Clippard Valve, 1/8 Inch NPT
Item Number: 18541
The MJV/MJVO series are high flow 1/8" NPT ported 2-Way, 3-Way and 4-Way valves that change their flow path when the stem is either depressed or released (spring return). The 2-Way and 3-Way valves are offered in both Normally-Closed and Normally-Open versions.
Acuator for Universal & Clinton Heavy-Duty Cutters
Item Number: 12507
Acuator for Universal & Clinton Heavy-Duty Cutters
Arm with Bushing for Universal & Clinton Heavy-Duty Cutters
Item Number: 12404
Arm with Bushing for Universal & Clinton Heavy-Duty Cutters
3" Knurled Roller for Pullers, 1/2" Bore
Item Number: 50438
3" Knurled Roller for Pullers, 1/2" Bore
Shaft Collar for Universal & Clinton Heavy-Duty Cutters
Item Number: 12652
Shaft Collar for Universal & Clinton Heavy-Duty Cutters
Pin Block for Universal & Clinton Heavy-Duty Cutters
Item Number: 12643
Pin Block for Universal & Clinton Heavy-Duty Cutters
Bimba Piston Rod Clevis Assembly, 1-1/2" Bore, 7/16-20 Rod Thread, 3/8" Clip Diameter
Item Number: 16557
Includes clevis, nut, pin and 2 spring clips.
Bimba Air Cylinder 1-1/16" x 1" (Bimba 091-P)
Item Number: 10012
Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.
Blade for Air Operated Impact Cutters, 1 Inch
Item Number: 57238
Blade for Air Operated Impact Cutters, 1 Inch
Guard for Universal & Clinton Heavy-Duty Cutters, fits 2-1/2 & 3 Inch Cutters
Item Number: 12403
Guard for Universal & Clinton Heavy-Duty Cutters, fits 2-1/2 & 3 Inch Cutters
Clippard Air Pilot Actuator, #10-32
Item Number: 11069
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Clippard Air Pilot Actuator, 1/8 Inch NPT
Item Number: 11070
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Valve Bracket for Universal & Clinton Heavy-Duty Cutters
Item Number: 12402
Valve Bracket for Universal & Clinton Heavy-Duty Cutters